AIR NEEDLE SCALER FOR REMOVING PAINT RUST DIRT OR WELDING SLAG
Click Image for Gallery
Needle scaler
Professional needle scaler for removing paint, rust or welding slag.
Can be used on textured surfaces, example checker plate.
A compressor is required with an airflow delivery of at least 114 l/min at 6.3 Bar to make use of the needle scaler.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL).
Replacement needles:
AT0024-SK02Features:
- 12 needles
- Dead man switch for added safety
- Low air consumption
Application:
- Removes rust, old paint or welding slag
- Remove rust on steel
Download the Exploded view:
View the Exploded view:
| Description | Specification |
| Working pressure | 6.3 Bar |
| Blows per minute | 2 800 Bpm |
| Average air consumption | 114 l/min |
| Suggested minimum compressor HP | 1 HP |
| Stroke length | 24mm |
| consider safety for your health and the people around you | |||
General safety suggestions:It is advisable to always have the following items nearby and in a good condition
|
|||
 |
 |
 |
 |
|
Wear Gloves
|
Eye Protection
|
Hearing Protection
|
Dust Mask
|